Alpine Type-S Speaker and Amp Bundle 6.5" S-S65C Component Set S-S65 Coaxials with S-A32F Amplifier

This bundle includes an Alpine S-32F Amplifier, a pair of Alpine S-S65C S-Series 6.5-inch Component 2-Way Speakers, a pair of Alpine S-S65 S-Series 6.5-inch Coaxial 2-Way Speakers & a wiring kit. Alpine S-A32F S-Series 4-Channel Digital Amplifier - 80 Watts RMS x 4 @ 2-Ohms The S-Series Amplifiers have a diagnostic LED located behind the blue Alpine Jewell on the top of the amplifier. A Blue light means the amplifier is operating normally. A red blinking light means the amplifier is currently too hot for operation and needs to cool down. A solid red light can mean three things; 1. Amplifier circuit is abnormal. 2. Temperature is too high. 3. Power supply voltage is too high. Specifications: Power output 4-Ohm @ 14.4 Volts: 55 W RMS X 4 Power output 2-Ohm @ 14.4 Volts: 80 W RMS X 4 Power output 4-Ohm Bridged @ 14.4 Volts: 160 W RMS X 2 Frequency Response:+0/-3 dB 10Hz - 30kHz Frequency Response:+0/-1 dB 20Hz - 20kHz Input Sensitivity: Hi (0.5 - 10V), Low (0.2 - 4.0V) Crossover: Variable HPF/LPF, (50Hz - 400 Hz) Dimensions: Width - 8-1/8", Height - 2-3/8", Depth - 8-1/8" Weight: 4lb 3 oz Alpine S-S65C & S-S65 6.5" Speakers: The new cosmetics of the S-Series looks good in nearly any car and their shallow mounting design allows for easy installation in a wide range of door panels. As well, their high-efficiency design can run off of the power from the factory or Alpine head unit, resulting in an easy system improvement for any vehicle. CEA-2031 Speaker rating: 80W maximum RMS, 240W peak power handling, nominal impedance 4Ω Frequency response: 70Hz - 22kHz 6-1/2" 2-way component & Coaxial speakers carbon fiber-reinforced plastic woofer cone with specialized rubber surround 3/4" silk dome tweeter sensitivity: 88 dB mounting diameter: 5 1/16" mounting depth: 2-5/16" grills not included warranty: 1 year

• Perfect for an OEM upgrade with many sizes to choose from to suit almost any vehicle
• Larger voice coil and new CFRP (Carbon Fiber Reinforced Plastic) cone
• Now with Alpine’s patented HAMR (High Amplitude Multi-Roll) Surround, allowing for large amounts of linear air movement
• The S-Series amplifiers were designed to perfectly complement the already established and loved S-Series speaker and subwoofer line.
• Power output 4-Ohm @ 14.4 Volts: 55 W RMS X 4